Seed Preparatory Equipment

Copra Dryer is mainly used to dry either wet copra and semi dried copra to make it suitable for extraction of Oil. The dried copra facilities to extract the oil at faster rate and helps to get oil drained. The drier will reduce the moisture from 40% to 7% and also at various moisture levels

The driers are of direct conduction driers, convection driers by Hot Air Radiators and or direct combustion flue gas driers for faster reduction of moisture. These driers are available on various capacities and designed, engineered and manufactured as per customer requirement. Special tailor made dryers could also be manufactured.

Features :

• Suitable direct and indirect applications
• Reduce wide range of moisture from 40%
• Available in wide range of Capacities
• Quality of Copra will be maintained
• Broken shell could be used for Boiler Fuel
• Contaminations will be avoided due to closed loop operation.
• Disintegration will be minimized due less drying time
• On line Operation will help energy saving during extraction.

A decorticator is a machine for stripping the skin, bark, or rind off nuts, wood, plant stalks, grain, etc. in preparation for further processing.

The grains or whole groundnuts etc will be passed through the hardened knives fitted on a rotating disc which peels sensitively the surface further the Vibration system isolates the shells, Skin etc and leaving kernel / meat for next step of operation.

• All Metal Construction
• Hardened knives for long life
• Vibration system to separate shells and hulls
• Low damage to the seeds/Kernels
• Wide variety of applications
• Single and double chambers based on Capacity
• Energy Efficient
• Could be synchronized with other machines
• Wide range of Capacities
• Minimum Maintenance
• Easily replaceable blades and rippers.

We are offering Dehulling Equipment that can remove hulls from the harvested seeds.  

Features :

• Efficient hull separation
• Low meat carry over
• Highly efficient design
• Wear resistant cyclones for Hulls connection
• Long life of Screens made from Hard steel
• Low maintenance

Goyum Pressure Type Destoners are used for removing impurities from the oil seeds / nuts

FEATURES :

• Versatile – any granular sepration into lights & heavies.
• All material design – allows easy cleaning
• Rubber busing Suspension
• Minimum Maintenance
• Practically vibration less – finely counter-balanced drive arrangement
• Improved drive and thrust
• New air throat design – no loss of good product
• Fast – removes all heavy foreign material
• Easy to adjust – simple control
• Durability – no shortcut in constructions
• Easy to adjust – simple control

Note : Capacity Approximate on wheat basis. It varies considerately depending of material ans its quality.

Features :

• It is completely designed with Steel Cast Bearing Body filled with bearing, oil seals grease nipple and cover
• Belt tensioning device is provided along with V-belts and Pulleys.
• Fabricated chamber size : 20″ long x 3 1/2″ Diameter.
• Feeder is provided to feed the material with uniform flow. Geared Motor of 1 HP is provided to drive the Feeder.

Hammer Mill is used for breaking Seeds, Copra (Coconuts) and Seed Cake / Meals from larger into smaller pieces. As the density of smaller pieces is larger, the capacity of Oil Press / Oil Expeller increases and also percentage of extracted oil.

FEATURES :

• Highly Balanced rotors
• 100% Screen and 50% Screens available
• A variety of sizes and patterns
• Highly Efficient
• Longer life plumber blocks and bearings to balance gyrating and thrust loads
• Heavy duty unique frame
• Large access doors for easy maintenance
• Wear and abrasive resistant Hammers and screens

Preparation of Seeds for Oil Extraction — Oilseeds need to be cleaned. These cleaners are equally efficient for cleaning of all types of ago-commodities. Designed with precision, GOYUM Seed Cleaners are suitable for efficient cleaning of agro-commodities like oil-seeds, nuts, soybean, etc. Seed Cleaning Machines are easy to operate and available with customization facilities.

FEATURE :

• Steel Fabricated Structure with Wooden Trays.
• Double Deck with Dust Blower.
• No. of Strokes / Oscillations per minute is 140.
• Dust Collector is provided for a pollution free machine.
• Highly Efficient for every seed.
• Low Maintenance.

FEATURES :

• Gap between the rolls could be adjusted to achieve specific size of the cracked pieces.
• Huge doors allow to inspect and maintain the machines easily.
• Automatic synchronization with feature with feed roll make the main rolls to disengage when there is no feed.
• Permanent Magnet at Feed roll prevent the damage of the grooves
• Special Chilling procedure to make the rolls harder for Longer life
• Rail type slide of bearings for easy movement
• Side sealed with Teflon sheets for proper sealing and prevent dusting and maintain hygiene conditions
• Special gear boxes will be provided for Higher capacity Cracking machines above 500 tons per day capacity.
• Rubber scrapers ensures online cleaning of the rolls
• Wide capacity range available

SPECIFICATIONS

·         Capacity:10 to 50 Tons/day

·         Feeding Drum:12 mm thick

·         Rolls:Material : Chilled Cast Iron

·         Size : 750 x 250 mm

·         Design : Grooved & Balanced

·         Quantity : 2 Pairs

·         Brushes:Provided to Clean the Rolls

·         Magnet Plates:Provided to Safeguard the Rolls

·         Inspection Glass Window: To See the Flow of Material